Where to buy
Testing your aquarium’s water parameters regularly is an important part of keeping and maintaining a healthy environment for your fish and invertebrates. This kit includes the four most essential test kits: Ammonia, Nitrite, Nitrate and Wide-Range pH. Each test comes with it’s own test tube, reagent solution and printed instructions with color chart.
To remove childproof safety cap, push down while turning.
Fill a clean test tube with 5 ml of water to be tested (to the line on the tube).
Add 8 drops from Ammonia Test Solution Bottle #1, holding dropper bottle upside down in a completely vertical position to ensure uniformity of drops added to the water sample.
Add 8 drops from Ammonia Test Solution Bottle #2, holding dropper bottle upside down in a completely vertical position to ensure uniformity of drops added to the water sample.
Cap the test tube and gently shake for 5 seconds. Attention! Always use the cap. Avoid skin contact as this may affect the test results.
Wait five minutes for the color to develop.
Read the test results by matching the color of the solution against the color chart. Note the freshwater and saltwater charts vary slightly.
Rinse the test tube with clean water after each use.
DO NOT allow test solutions to get into aquarium. Read and follow all precautions on the product label.
To remove childproof safety cap, push down while turning.
Fill a clean test tube with 5 ml of water to be tested (to the line on the tube).
Add 5 drops from Nitrite Test Solution, holding dropper bottle upside down in a completely vertical position to ensure uniformity of drops added to the water sample.
Cap the test tube and gently shake several times to mix solution. Always use the cap. Avoid skin contact as this may affect the test results.
Cap the test tube and shake for one minute. This step is extremely important to ensure accuracy of test results.
Wait five minutes for the color to develop.
Read the test results by matching the color of the solution against the color chart.
Rinse the test tube with clean water after each use.
DO NOT allow test solution to get into aquarium. Read and follow all precautions on the product label.
To remove childproof safety cap, push down while turning.
Fill a clean test tube with 5 ml of water to be tested (to the line on the tube).
Add 10 drops from Nitrate Test Solution Bottle #1, holding dropper bottle upside down in a completely vertical position to ensure uniformity of drops added to the water sample..
Cap the test tube and gently shake several times to mix solution. Always use the cap. Avoid skin contact as this may affect the test results.
Vigorously shake the Nitrate Test Solution Bottle #2 for at least 30 seconds. This step is important to ensure accuracy of test results.
Add 10 drops from Nitrate Test Solution Bottle #2, holding dropper bottle upside down in a completely vertical position to ensure uniformity of drops to the water sample.
Cap the test tube and shake for one minute. This step is extremely important to ensure accuracy of test results.
Wait five minutes for the color to develop.
Read the test results by matching the color of the solution against those on the Nitrate Test Color Chart.
DO NOT allow test solutions to get into aquarium. Read and follow all precautions on the product label.
To remove childproof safety cap, push down while turning.
Add 3 drops of pH reagent, holding dropper bottle upside down in a completely vertical position to ensure uniformity of drops added to the water sample.
Cap the test tube and gently shake several times to mix solution. Attention! Always use the cap. Avoid skin contact as this may affect the test results.
Immediately read the test results by matching the color of the solution against those on the Nitrite Test Color Chart. Be aware that freshwater and saltwater results are different.
Rinse the test tube with clean water after each use.
DO NOT allow test solutions to get into aquarium. Read and follow all precautions on the product label.
| Item # | Case QTY | UPC |
|---|---|---|
| 75004009 | 12 | 080531040096 |
